Conset (Parts A & B)
Item
Numbers: 8142-0703, 8142-0727, 8142-0729, 8142-0731, 8142-0735, 8142-0739,
8142-0743, 8142-0747, 8142-0751, 8142-0752, 8142-0755, 8142-0758, 8142-0760
Part A
U.S. Department Of Labor
Occupational Safety And
Health Administration
MATERIAL SAFETY DATA SHEET
Required Under USDL
Safety And Health Regulations
(29 CFP 1910.1200
"Hazards Communication Standard")
Section I
Manufactured For: Gabriel First Corp.
Emergency Telephone: 800-424-9300
Address: 233 W Commercial Street East Rochester, NY 14445
Trade Name &
Synonyms:
Conset Part A
Prepared On: 09/16/200
Section II - Product & Component Data
Chemical Names CAS PEL TLV STEL mmHg@Temp
1,2 Ethane Diamine 111-40-0 1ppm 1ppm None 0.0 @ 68 F
Tetraethylene Pentamine 112-57-2 None None None N/A
Ethylenediamine 107-15-3 10ppm 10ppm 10ppm 10.7 @ 68 F
Pentaethylene Hexamine 4067-16-7 None None None N/A
Water 7732-18-5 None None None N/A
Propylene Glycol
Monomethyl Ether 107-98-2 100ppm 100ppm 150ppm 10.9 @ 77 F
Glacial Acitic Acid 64-19-7 10ppm 10ppm None 11 @ 68 F
Stoddard Solvent 8052-41-3 100ppm 100ppm None 2.0 @ 68 F
2-Ether-1-Hexanol 104-76-7 None None None 10.0 @ 68 F
Glycol Ether
2-Butoxethanol 111-76-2 25ppm 25ppm None 10.0 @ 97 F
*Indicates toxic
chemical(s) subject to the reporting requirements of Section 313 of Title III
and of 40 CFR 372. Follow 311b (2) (A) 40 CFR 116,117, guidelines. Follow TSCA
8 (a) 40 CFR 712, 47 FR 26992 guidelines.
Section III - Physical Data
Boiling Point: 212°F
Specific Gravity (H2O=1): 1.0
Vapor Pressure: NA
Percent, Volatile By
Volume(%):
Vapor Density(Air=1): NA
Evaporation Rate: NA
Solubility In Water: Emulsifyable
Appearance And Odor: Low viscosity
liquid-clear.
Section IV - Fire And Explosion Hazard Data
Special Fire Fighting
Procedures:
Toxic fumes will be evolved when this material is involved in a fire. A
self-contained breathing apparatus should be available for fire fighters. Cool
fire exposed containers with water.
Flash Point/Method Used: 201°F (Seta Flash)
Flammable Limits: N/A
Extinguishing Media: Foam, Alcohol Foam,
CO2, Water Fog.
Unusual Fire And
Explosion Hazards:
None.
Section V - Health
Hazard Data
Effects Of Overexposure:
Health Hazards (Acute
& Chronic):
Prolonged
or repeated exposure may cause Asthma and skin sensitization or other Allergic
responses.
Eyes: Can cause eye
irritation or redness.
Skin: Irritation to the skin
may occur but Dermal Absorption Toxicity is low.
Inhalation: High concentrations of
vapor can cause irritation to the respiratory tract, nausea and dizziness.
Ingestion: Can cause nausea or
similar responses.
Cercinogenicity: NTP?
NO IARC Monographs? NO
Medical Conditions
Aggravated By Exposure: Respiratory or other allergic ailments.
Emergency First Aid
Procedures:
Eyes: Flush with plenty of water for at least 15
minutes while lifting upper and lower lids. Get immediate medical attention.
Skin: Flush skin with water
for at least 15 minutes and remove all contaminated clothing immediately. Get
medical attention if reddening or swelling occurs.
Inhalation: If affected by inhalation of vapor or spray
mist, remove to fresh air. Administer oxygen if necessary.
Swallowing: Do not induce vomiting. Dilute by giving water
or milk to drink if victim is conscious. Get medical attention immediately.
Section VI - Reactivity Data
Stability Conditions To Avoid
Stable Contact
with open flames and all sources of ignition and sparks.
Materials To Avoid: Avoid contact with
strong oxidizing agents, material acids and epoxy resins in uncontrolled
amounts.
Hazardous Decomposition
Products:
CO, CO2, NOX
Hazardous
Polymerization Conditions
To Avoid
Will not occur.
Section VII - Spill Or Leak Procedures
Steps To
Be Taken In Case Material Is Released Or Spilled:
Avoid contact with material. Wear the
appropriate safety equipment. Stop spill at source. Dike area to prevent
spreading. Pump liquid to salvage tank. Take up reminder with clay or other
absorbent and place in disposal
containers.
Waste
Disposal Method:
Dispose of
material as hazardous waste according to Federal, State and Local
regulations.
Section VIII - Special Protection Information
Respiratory
Protection(Type):
Wear appropriate, properly fitted respirator (NIOSH/MSHA approved) in the
absence of proper environmental controls.
Ventilation: Avoid breathing vapors.
Ventilation must be sufficient to keep vapors under control.
Protective Gloves: Impervious gloves,
neoprene or rubber.
Eye Protection: Splash proof goggles or
safety glasses with slide shields.
Other Protective
Equipment: Clean
body covering clothing as well as apron, footwear or other equipment should be
used as deemed necessary to avoid contact with material.
Section IX - Special Precautions
Precautions
To Be Taken In Handling And Storing: Avoid all skin contact. Avoid breathing vapors.
Reseal partially used containers. Properly label all containers. Wash with soap
and water before eating, drinking, smoking or using toilet facilities. Observe
conditions of good industrial hygiene and safe working practices.
Other Precautions: Mixed materials contain the hazards of all the
components therefore, read the MSDS of all components to become familiar with
all hazards prior to using this product.
Part B
U.S. Department Of Labor
Occupational Safety And
Health Administration
MATERIEL SAFETY DATA SHEET
Required Under USDL
Safety And Health Regulations
(29 CFP 1910.1200
"Hazards Communication Standard")
Section I
Manufactured For: Gabriel First Corp.
Emergency Telephone: 800-424-9300
Address: 233 W Commercial Street East Rochester, NY 14445
Trade Name &
Synonyms:
Conset
Part B
Prepared On: 10/22/03
HMIS Codes
HEALTH FLAMMABILITY REACTIVITY MPP
1 1 0 G
Section II - Product & Component Data
Chemical Names CAS PEL TLV STEL mmHg@TEMP
Modified Diglycidyl
Ether of Bisphenol A 25068-38-6 None None None 1.0@
356 F
Alkyl Glycidyl Ether 68609-97-2 None None None N/A
Section III - Physical Data
Boiling Point: 200 - 279 F
Specific Gravity (H2O=1): 1.5
Vapor Pressure: NA
Percent, Volatile By
Volume(%):
Vapor Density(Air=1): NA
Evaporation Rate: NA
Solubility In Water: Negligible
Appearance And Odor: Low viscosity
liquid-clear.
Section IV - Fire And Explosion Hazard Data
Special Fire Fighting
Procedures:
Do not enter confined fire area with full bunker gear including a positive
pressure NIOSH approved self-contained breathing apparatus. Cool all fire
exposed containers with water.
Flash Point/Method Used: 200°F (Seta Flash)
Flammable Limits: N/A
Extinguishing Media: Foam, Alcohol Foam,
CO2, Water Fog, Dry Chemical.
Unusual Fire And
Explosion Hazards:
None known
Section V - Health Hazard Data
Effects Of Overexposure:
Health Hazards (Acute
& Chronic):
Epoxy
resins can cause sensitization by exposure through contact of high
concentrations of vapor. Eye injury is unlikely but stain for evidence of
corneal injury.
Eyes: Can cause eye
irritation but corneal injury is unlikely.
Skin: May cause irritation or
allergic skin response. Not likely to be absorbed in toxic amounts.
Inhalation: No guide for control
known, however, exposure to heated
vapors can cause irritation to the nose, throat or mucous membranes.
Ingestion: This material has a
probable low acute oral toxicity.
Carcinogenicity: NTP?
NO IARC Monographs? NO
OSHA Regulated? NO
Medical Conditions
Aggravated By Exposure: Respiratory or other allergic ailments.
Emergency First Aid
Procedures:
Eyes: Flush with plenty of water for at least 15
minutes while lifting upper and lower lids. Get immediate medical attention.
Skin: Skin contact will
usually cause no more than irritation but wash affected area with soap and
water and remove contaminated clothing promptly..
Inhalation: Remove victim to fresh air area and administer
oxygen if necessary.
Ingestion: Low in toxicity. Induce vomiting only if large
amounts of material are ingested, otherwise do not induce vomiting, in either
case immediately consult a physician.
Section VI - Reactivity Data
Stability Conditions To Avoid
Stable Excessive
heat and open flames.
Materials To Avoid: Can react vigorously
with strong oxidizing agents and strong Lewis acids or material acids.
Hazardous Decomposition
Products:
CO2, Aldehydes, acids. Reaction with
some curing agents can generate large amounts of heat.
Hazardous
Polymerization Conditions
To Avoid
Will not occur.
Section VII - Spill Or Leak Procedures
Steps To
Be Taken In Case Material Is Released Or Spilled:
Wear respirator and protective clothing shut off
the leak. Remove access with vacuum truck. Take up remainder with an absorbent
such as clay and place in disposal containers. Flush area with water to remove
residue.
Waste
Disposal Method: Dispose of in waste disposal site according to Federal,
State and Local regulations.
Section VIII - Special Protection Information
Respiratory
Protection(Type):
Wear appropriate, properly fitted respirator (NIOSH/MSHA approved) in the
absence of proper environmental controls. General exhaust is usually sufficient
in lieu of NIOSH respirator.
Ventilation: General exhaust is
usually sufficient to control vapors and exposure hazards.
Protective Gloves: Impervious gloves,
neoprene or rubber.
Eye Protection: Splash proof goggles or
safety glasses with slide shields.
Other Protective
Equipment: Clean
body covering clothing as well as apron, footwear or other equipment should be
used as deemed necessary to avoid contact with material.
Section IX - Special Precautions
Precautions
To Be Taken In Handling And Storing: Store in cool dry place. Seal all partially
used containers. Wash with soap and water before eating, drinking, smoking or
using toilet facilities. Mixed materials contain the hazards of all the
components, therefore, read the msds’s of all the components prior to using the
material. Properly label all containers..
Other Precautions: Avoid all skin contact. Avoid breathing vapors
generated from the material. Observe conditions of good general hygiene and
safe working practices. Contaminated leather articles cannot be cleaned and
must me discarded if contaminated with this product. Wash all contaminated
clothing prior to the reuse thereof.
This information is given in good faith, but no warranty expressed or implied is made. Our company believes that it is accurate to the best of its knowledge and relates only to the specific material designated