
Fast
Spray & Wipe Aerosol
Item Number: 2660-0953
U.S. Department Of Labor
Occupational Safety And
Health Administration
Required Under USDL
Safety And Health Regulations
(29 CFP 1910.1200
"Hazards Communication Standard")
Manufactured For: Gabriel First Corp.
Emergency Telephone:
1-800-424-9300
Address: 233 W Commercial Street East Rochester, NY 14445
Trade Name &
Synonyms:
FAST SPRAY & WIPE AEROSOL
Prepared On: 05/27/2005
HMIS
RATING
HEALTH FLAMMABILITY REACTIVITY MPP
2 1 0 B
Component(s)/ Chemical Names CAS
Registry No % PEL TLV
2 Butoxy Ethanol 111-76-2 4.85 25PPM 25PPM
Alkyl Dimethyl Amine
Oxide 7128-91-8 1.0-5.0 NE
Cartenary Ammonium
Chloride 5197-80-8 0.1-0.5 NE
Sodium Ethylene Diamine
Tetraacetate 64-02-8 1.0-5.0 NE
Liquified Petroleum Gas 68476-85-7 1.0-5.0 1000 1000
Boiling Point: NA
Specific Gravity (H2O=1): <1
Vapor Pressure: 115 @ 130F
Percent, Volatile By
Volume(%):
Vapor Density(Air=1): >1
Evaporation Rate: <1
Solubility In Water: 10%
Appearance And Odor: Foaming Spray,
Floral-Ammonia Odor.
Special Fire Fighting
Procedures: keep containers
cool. Use shielding to protect
personnel form bursting. At elevated
temperatures over 54c-130f containers may vent, rapture, or burst.
Flash Point/Method Used: NONE
Flammable Limits: LEL:
1.8 UEL: 9.2
Extinguishing Media: Carbon Dioxide, Foam,
Dry Chemical
Effects
Of Overexposure:
Eyes:
Irritates.
Skin:
contact may cause reddening and irritation.
Inhalation:
may cause dizziness and drowsiness.
Ingestion:
not likely, but if occurs, ingestion may result in vomiting
which could cause aspiration pneumonitis.
Emergency First Aid
Procedures:
Eyes: Flush eyes with water
for fifteen minutes. Remove contact
lenses prior to washing.
Skin: remove contaminated clothing. Then wash with
soap & water.
Inhalation: Remove victim to fresh air. Give CPR if not breathing. get medical help
.
Ingestion: Get medical attention.
Stability Conditions To Avoid
Stable
Materials To Avoid: Strong oxidizing agents,
reactive metals, heat, and open flame.
Hazardous Decomposition
Products: carbon
dioxide, carbon monoxide, and additional toxic chemicals may be formed in small
amounts.
Hazardous
Polymerization Conditions
To Avoid
Will not occur do
not store above temperatures above 54c-130f.
Keep away from heat, direct
sunlight,
open flames, or sparks. Dropping of containers
may cause bursting.
Steps To Be Taken In
Case Material Is Released Or Spilled:
Remove
sources of flame, spark, or heat. Soak
up spills with an inert absorbent and place into a designated disposal container.
Waste Disposal Method:
Do
not puncture or incinerate. When
contents are depleted continue to depress button until all gas is expelled and
dispose of container in accordance with local, state, and federal regulations.
Respiratory
Protection(Type):
None required.
Ventilation: local exhaust is
recommended.
Protective Gloves: chemical resistant.
Eye Protection: chemical safety
glasses.
Other Protective
Equipment: wear
impervious clothing.
Precautions To Be Taken
In Handling And Storing:
Contents
under pressure. So not store where
temperatures may exceed 54C-130F. Avoid
breathing vapor. Keep away from heat or
open flame.
Other Precautions:
Please
read the label carefully, it is your best guide to using the product in the most effective manner.
Supplier
notification under section 313 of SARA
Pursuant
to title 111 of the SUPERFUND amendments and reauthorization act of 1986 (SARA)
and 40 CFR part 372, our product: fast spray & wipe aerosol contained toxic
chemicals in quantities subject to the
reporting requirements under section 313 (see below). Effective January 1, 1989, any person who sells or
otherwise distributes a mixture or
trade name product containing toxic chemicals must provide written notice to
the recipient with the first shipment in each calendar year. If the recipient repackages or otherwise
redistributes this product a notice indicating that this product is subject to
the reporting requirements of section 313, including the reporting chemical
name/category, CAS number and percent by weight, must accompany the
shipment. Please note that he
notification letter must be attached to the material safety data sheet.
CHEMICAL NAME CASE
NUMBER %
BY WEIGHT
2-BUTOXY ETHANOL 111-76-2 4.85
This information is given in good faith, but no warranty expressed or implied is made. Our company believes that it is accurate to the best knowledge and relates only to the specific material designated herein.